Novell ZENworks Network Access Control 5.0, User Manual, Page: 354 / 534

354 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
print "Checking ports " + str(ports) + " on host " +
self.session.host()
#
# Do your test here. Modify the returnHash accordingly.
#
portsOpen = ""
#
# Use a Python socket to connect directly to the target host
#
import socket
_____________________________________________________________________________
for p in ports:
hp = self.session.host()+":"+str(p)
s = None
try:
if debug:
print "Connecting to " + hp
_____________________________________________________________________________
#
# Try to open the port. Throws an exception if connection
# is refused or times out (set timeout to 5 seconds).
#
# Note that Novell ZENworks Network Access Control uses a
restricted Python socket
# library that doesn't allow connections to arbitrary
# hosts.
Normally, the first element of the tuple passed
# to socket.connect() is the IP or hostname; in SA, you
# must pass the Session object form which the socket
# object will get the target host IP/name.
#
s = socket.socket()
s.settimeout(5)
s.connect((self.session, int(p)))
# Uh oh, no exception. The port was open
_____________________________________________________________________________
s.close()
if debug:
print "Connected to "+hp+". Port open!"
#
# Add the port to our list of open ports for use later
#
por= str(p) + ","