Novell ZENworks Network Access Control 5.0, User Manual

Page: 211 / 534

NAC Policies 211
no
vd
ocx
(e
n)
24
Ma
rch 20
09
To set the time an end-user can be inactive:
Home window>>NAC policies>>Select a NAC Policy>>Basic settings menu option
1 In the
Inactive endpoints area
, enter how long an end-user can be inactive before
they are quarantined.
TIP: A lower number ensures higher security.
2 Click
ok
.
6.3.12 Defining Non-supported OS Access Settings
To define what actions to take for endpoints with non-supported operating systems:
Home window>>NAC policies>>Select a NAC Policy>>Basic settings area
1 In the
Operating systems
area, select the check box beside any operating system that
you will allow access without being tested.
2 Click
ok
.
6.3.13 Setting Test Properties
Test properties are specific to the particular test. Select the properties you want applied. Tests are
explained in detail in
Appendix B, “Tests Help,” on page 393 .
To set the test properties for a specific test:
Home window>>NAC policies>>Select a NAC Policy>>Tests menu option
1 Click on the name of test to display the test’s options.
NOTE: Click a test name to display the options; select the test check box to enable the test for
the policy you are modifying.
2 Select the test failure actions to apply for this test:
Š Send email notification
Š Quarantine access
3 Select any test properties if applicable.
4 Click
ok
.
6.3.14 Selecting Action Taken
Actions can be passive (send an email), active (quarantine) or a combination of both.
To select the action to take:
Home window>>NAC policies>>Select a NAC Policy>>Tests menu option
1 Click on the name of test to display the test’s options.