Novell ZENworks Network Access Control 5.0, User Manual

Page: 248 / 534

248 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
7o Click
OK
.
7p Click
Next
.
Figure 11-16
IAS, Remote Access Policy, Authentication Method
NOTE: If you choose PEAP as your authentication mechanism in Step 7q on page 248 ,
see Step 8 on page 248 before completing Step 7r and Step 7s . Adding a certificate, if your
server does not already have one, and configuring PEAP is explained in Step 8 on
page 248 .
7q Select the EAP type from the drop-down list.
IMPORTANT: The type selected here must match the type selected for the endpoint
described in Step 5 on page 243 , Step 7 on page 267 .
7r
Click Next .
7s Click
Finish
.
8
The PEAP authentication method requires that a specific type of SSL certificate is available for
use during authentication. These steps assume there is a Domain Certificate Authority (CA)
available to request a certificate.
Click
Configure .
If you receive the error message shown in Figure 11-17 on page 249 , complete these steps to
request a certificate.
These steps assume there is a Domain Certificate Authority (CA) available to request a
certificate. If there is not a CA available, the certificate needs to be imported manually.
NOTE: To import the certificate manually:
1.Right-click on the Personal folder>>select All Tasks>>Import.
2.When the wizard opens, click Next.
3.Enter the path to the Novell ZENworks Network Access Control certificate, for example:
D:\support\ias\compliance.keystore.cer
4.Click Next, Next, and Finish.