Novell ZENworks Network Access Control 5.0, User Manual, Page: 93 / 534

System Configuration 93
no
vd
ocx
(e
n)
24
Ma
rch 20
09
9 Re-enter the console password.
10 Enter the password with which to enter enable mode.
11 Re-enter the enable mode password.
12 Enter the
Reconnect idle time
. This is the amount of time in milliseconds that a telnet /
SSH console can remain idle or unused before it is reset.
13 Select the
Show scripts
plus symbol to show the following scripts:
Š Initialization script — The expect script used to log into the console and enter enable
mode.
Š
Re-authentication script — The expect script used to perform endpoint re-
authentication.
Š
Exit script — The expect script used to exit the console.
14
Click
ok
.
TIP: Click revert to defaults to restore the default settings.