manualshive.com logo in svg

Novell ZENworks Network Access Control 5.0, User Manual, Page: 296 / 534

Share
Download
Novell ZENworks Network Access Control 5.0 User Manual Download Page 296

296

Novell ZENworks Network Access Control Users Guide

no

vd

ocx 

(e

n)

  

24

 Ma
rch 20

09

Your DAC host can be a Windows server. This section provides instructions on setting up a 
Windows host.

First, download the executable file to your Windows server, then run the installer to install the first 
interface. For this release, if you want to add additional interfaces, you must install them manually. 
A future release will expand the options in the installer to include multiple interfaces. Add any 
additional interfaces and start the service.

The following sections contain more information:

Š

Section 13.1.1, “Downloading the EXE File,” on page 296

Š

Section 13.1.2, “Running the Windows Installer,” on page 296

Š

Section 13.1.3, “Adding Additional Interfaces,” on page 302

Š

Section 13.1.4, “Configuring the MS and ES for DAC,” on page 303

Š

Section 13.1.5, “Adding Additional ESs,” on page 304

Š

Section 13.1.6, “Starting the Windows Service,” on page 305

Š

Section 13.1.7, “Viewing Version Information,” on page 305

Š

Section 13.1.8, “Removing the Software,” on page 306

13.1.1  Downloading the EXE File

To download the EXE file to a Windows machine:

Browser window

Download and save the EXE file to a Windows machine. Copying files is described in 

Section 1.9, 

“Copying Files,” on page 28

. The EXE file can be downloaded directly from the MS:

/usr/local/nac/webapps/ROOT/installers

Or, if you have an install CD, copied from the following directory:

X:\support\Installers\DACInstaller.exe

Where 

X: 

is the drive letter of your CD drive.

13.1.2  Running the Windows Installer

The Windows installer performs the following tasks:

Š

Installs the DAC software

Š

Installs the JavaJRE software if needed

Š

Installs the WinPcap software if needed

Š

Modifies the wrapper.conf file

Š

Installs DAC as a Windows service

NOTE: 

If you have already installed DAC, you must uninstall it before attempting to install a newer 

version. See the 

Section 13.1.8, “Removing the Software,” on page 306

 for instructions.

Summary of Contents for ZENworks Network Access Control 5.0























































































































































































































































































































































































































































































































































Reviews:

No comments