Novell ZENworks Network Access Control 5.0, User Manual, Page: 113 / 534

System Configuration 113
no
vd
ocx
(e
n)
24
Ma
rch 20
09
The icons on the Endpoint activity window show that the endpoint is quarantined by an external
service. When you hover the cursor over the icon, the quarantine details are presented in a pop-up
window:
Figure 3-43
Post-connect Quarantine Details
3.14.7 Adding Post-connect System Logos and Icons
The post-connect logo that appears in the mouseover help (see Figure 3-43 on page 113 ), and the
icon that appears in the Endpoint activity window is the logo for your post-connect system. If you
have more than one post-connect system, you will see more than one logo and more than one icon.
You can use your own custom logos and icons for your post-connect service.
To change the mouseover logo and icons:
Command line window
1 Create logo and icon files in the following formats and approximate sizes:
JPG
GIF
PNG
Logo file — approximately 154 pixels wide x 24 pixels high
Icon file — approximately 18 x 18 pixels
2
Copy the logo and icon files to the following directory on the Novell ZENworks Network
Access Control MS (see
Section 1.9, “Copying Files,” on page 28 ):
/usr/local/nac/webapps/ROOT/images
3 Log in to the Novell ZENworks Network Access Control MS as
root
using SSH or directly
with a keyboard.
4 Modify the following properties in the
nac-ms.properties
file (see Section 16.5.10,
“Changing Properties,” on page 337 ):
Compliance.PostConnect.Agents. <PRODUCTID> .Logo= <Logo filename>
Compliance.PostConnect.Agents. <PRODUCTID> .Icon= <Icon filename>
Compliance.PostConnect.Agents. <PRODUCTID> .Name= <Friendly Product Name>
Where:
<PRODUCTID> is the identifier for the post-connect service. For example,
PostConnectServiceName
<Logo filename> is the name of the logo file. For example, logo_post_connect.gif