Novell ZENworks Network Access Control 5.0, User Manual, Page: 46 / 534

46 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
2 Click the
Configuration
menu option to access the Enforcement Server’s settings. The
Configuration
area is displayed:
Figure 3-6
Enforcement Server
3 Edit the following settings:
Š
ES Network settings — Section 3.4.4, “Changing the ES Network Settings,” on page 46
Š ES Date and time — Section 3.4.5, “Changing the ES Date and Time,” on page 47
Š
ES SNMP settings — Section 3.4.6, “Modifying the ES SNMP Settings,” on page 47
Š Other settings — Section 3.4.7, “Modifying the ES root Account Password,” on page 48
4 Click
ok
.
3.4.4 Changing the ES Network Settings
IMPORTANT: Back up your system immediately after changing the MS or ES IP address. If you
do not back up with the new IP address, and later restore your system, it will restore the previous IP
address which can show an ES error condition and cause authentication problems. See
Section 3.15,
“Maintenance,” on page 114 for instructions on backing up and restoring your system.
To change the ES network settings:
Home window>>System configuration>>Enforcement clusters & servers>>Select an
ES>>Configuration