send messages using the Keyboard Ports. If you change the Keyboard Ports setting then all controls assigned to KeybPORT
will follow the change automatically.
The options for this setting are as follows:
OFF – MIDI data is not transmitted
U1 – Sent to USB Port 1
U2 – Sent to USB Port 2
M1 – Sent to SL Compact MIDI Out Connector
U1 M1 – Sent to USB Port 1 and MIDI Out Connector
U2 M1 – Sent to USB Port 2 and MIDI Out Connector
ComnPORT – Follow the ComnPort setting (see below)
ComnChan (Common MIDI Channel):
This sets the Common MIDI channel. Any assignable controls that have
MidiChan
set to ‘ComnCHAN’ in Edit Mode will send messages using the Common MIDI Channel. If you change the Common MIDI
Channel setting then all controls assigned to ComnCHAN will follow the change automatically. This feature is useful where
you want to change the channel of some or all assignable controls in one template as it can be achieved by changing only
one setting. The factory programmed standard templates on the SL Compact have been created such that all assignable
controls have
MidiChan
set to ComnCHAN so that you can change the MIDI channel by simply altering the Common MIDI
Channel setting. This setting can also be accessed from the Quick Menu in Play Mode.
ComnPort (Common Port):
This sets the Common MIDI port(s). Any assignable controls that have
Ports
set to
ComnPORT in Edit Mode will send messages on the MIDI ports set here. If you change the Common Port setting then all
controls assigned to ComnPORT will follow the change automatically. This feature is useful where you want to change the
routing of some or all assignable controls in one template as it can be achieved by changing only one setting. The factory-
programmed standard templates on the SL Compact have been created such that all assignable controls have
Ports
set to
ComnPORT, so that you can change the routing by simply altering the Common Port setting. The options for this setting are
as follows:
OFF – MIDI data is not transmitted
U1 – Sent to USB Port 1
U2 – Sent to USB Port 2
U3 – Sent to USB Port 3
M1 – Sent to SL Compact MIDI Out Connector
U1 M1 – Sent to USB Port 1 and MIDI Out Connector
U2 M1 – Sent to USB Port 2 and MIDI Out Connector
U3 M1 – Sent to USB Port 3 and MIDI Out Connector
TEMPLATE MENU PAGE 2 – Template Grouping
The second page of the Template Menu is as follows:
This page contains the settings that apply to creating template groups. Template groups have already been mentioned in the
Play Mode section on page 45 and an example was given as to where template groups might be a useful feature. Here is
an explanation of the settings used to create template groups:
58
Template
17
Position
2
Size :
2
FM7
Native Instr
Summary of Contents for ReMOTE SL COMPACT
Page 1: ...FA000 01...
