The encoders and buttons only control the 8 mixer tracks active on the SL Compact. To bank to other tracks on the mixer,
use the PAGE UP/DOWN buttons. When the encoder BUTTONS GROUP D SWITCH is pressed, the SL Compact display
shows the function of each of the other group switches, which is useful if you forget how the mixer parameters are assigned
to the SL Compact.
It is possible to control plug-ins using the MOTU DP Automap template by pressing the BUTTONS GROUP B4 SWITCH to
enter Insert mode. The SL Compact controls can then be used to control plug-ins as follows:
There are in fact two modes for controlling plug-ins – Insert Select mode and Insert Edit mode. You can switch between
these two modes using BUTTON 5. In Insert Select mode you can select different plug-ins or different plug-in presets and in
Insert Edit mode you can edit plug-in parameters. When you first press BUTTONS GROUP B4 SWITCH the SL Compact will
go into Insert Select mode but after that it will remember which Insert mode you were previously in when switching between
controlling the mixer and plug-ins.
In Insert mode the SL Compact display can show a maximum of 4 insert slots or 4 plug-in parameters at one time.
ENCODERS 1-4 correspond to these insert slots/parameters. ENCODER 5 is used to scroll through insert slots or
parameters. ENCODERS 6-8 and BUTTONS 6-8 are not used in Insert mode.
In Insert Select mode, the SL Compact display shows the insert slots of the currently selected track. The plug-in names are
shown on the top line and, if a preset is selected, the preset name is shown on the bottom line:
There are 5 insert slots for each track in Digital Performer but only 4 can be displayed at one time on the SL Compact so
use ENCODER 5 to access the 5th insert slot.
To edit the inserts on a different track, press and hold F1/ENCODERS. You will see abbreviated track names on the SL
Compact display – press the button above the track with inserts you want to edit. Note that you may need to press the
PAGE UP/DOWN buttons whilst F1/ENCODERS is held down to scroll through banks of tracks to find the one you want.
36
Confirm plug-in/preset selection when selecting
plug-ins/presets or choose an Insert for control in
Insert Select mode
Scroll through available plug-ins and presets
when assigning Inserts or adjust parameters
in Insert Edit mode
Scroll through pages of parameters
in Insert Edit mode
Toggle Insert Select and
Insert Edit modes
Bank to other mixer tracks
when F1 is held down to
select a different track
Hold down and press
an assignable button
to select a track to
edit in Insert mode
In Insert Select
mode, press to
switch encoder
function between
plug-in and preset
Press any of these to exit Insert mode
Pan
1. 1.
Esvclcmp
<
Crystal
Dynamics
<
Flanger
:
Plate
:
Tremolo
:
Summary of Contents for ReMOTE SL COMPACT
Page 1: ...FA000 01...
