With [Mixer] selected, you can use the SL Compact’s controls as follows:
If you want to change the way in which the Cubase mixer parameters are mapped to the SL Compact then you can use the
Learn, Clear, Add Page, Remove Page and Clear All functions accessed from buttons group B4 (see page 15 for further
information on these functions).
To switch to controlling plug-ins, simply give any Automap-wrapped plug-in Automap focus by clicking the Automap logo in the
bottom left-hand corner of the plug-in window or selecting it from the SL Compact by pressing and holding SHIFT and using
the PAGE UP/DOWN buttons.
LOGIC PRO/EXPRESS AUTOMAP
To set up Logic Mixer Automap, carry out the following steps:
1. Make sure you have Logic 7.1 or later.
2. Connect the SL Compact to your computer, turn it on and open Logic.
3. In Logic go to Preferences->Control Surfaces->Setup...
22
Cycle through available sends
Control sends, panning, track faders
Control solos, record arming, mutes
Bank to other
mixer tracks and
(with SHIFT held
down) switch
between the mixer
and any active VSTs
Sends
Panning Track
faders
Solos Records Mutes Activate
Automap
Menu
Summary of Contents for ReMOTE SL COMPACT
Page 1: ...FA000 01...
