Novation ReMOTE SL COMPACT, User Manual

Page: 52 / 70

REGISTERED PARAMETER NUMBER (RPN) –
The DispType, LowVal, HighVal, Ports, MidiChan, BtnType and Name settings are the same as for Control Change (CC)
so see that section for information on these settings.
RPN lsb (Registered Parameter Number Least Significant Byte): This allows you to set the RPN lsb value for the
control to a value from 0 through 127.
RPN msb (Registered Parameter Number Most Significant Byte): This allows you to set the RPN msb value for the
control to a value from 0 through 127.
You can toggle display format of the RPN lsb and RPN msb setting between decimal and hexadecimal by pressing and
holding MENU and then pressing the ENCODER GROUP A SWITCH.
SYSTEM EXCLUSIVE (SYSEX) –
The LowVal, HighVal, Ports, MidiChan, BtnType and Name settings are the same as for Control Change (CC) so see that
section for information on these settings.
DispType (DisplayType): The options for this setting are the same as for CC however the REL1, REL2 and APOT display
types are not available for encoders.
DataType: This allows you to set the format of the sysex message as follows:
NONE – Sysex message does not contain a variable byte and a fixed message is sent every time the
control is operated.
SINGLE – Sysex message contains one variable byte. The value of this byte is determined by the current control
value and limited by the Low Value and High Value settings. The position of the variable byte in the sysex message
can be edited.
ROLAND – Sysex message contains one variable byte and one checksum byte. The value of the variable byte is
52
Control
RPN
DispType
0-127
Low Val
0
High Val
|127
Ports
ComnPORT
MidiChan
ComnCHAN
RPN lsb
52
RPN msb
68
BtnType
STEP
Change Case Numbers etc Name:
Upper Lower Punctu « CHAR »
PAGE 2
PAGE 1
Control
SYSEX
DispType
0-127
Low Val
0
High Val
|127
Ports
ComnPORT
Length
6
DataType
NONE
DataPsn
0
BtnType
STEP
Change Case Numbers etc Name:
Upper Lower Punctu « CHAR »
PAGE 2
PAGE 1
PAGE 3
SYSEX F0 00 00 00 00 00 00 F7
« VALUE »