When you switch to a different page, all controls in all groups will be assigned to different parameters on the same device.
To scroll through pages of parameters in Reason Automap mode, repeatedly press any of the GROUP SELECT SWITCHES
(except for the ENCODERS GROUP D SWITCH). To check which page you are currently on, press F1/ENCODERS and check
the ‘Section’ value.
To demonstrate this, press the ENCODERS GROUP B SWITCH whilst controlling Subtractor. You should see the filter cutoff
and resonance parameters on the last two encoders (shown on the LCD screen). Now press the ENCODERS GROUP B
SWITCH again and you will see the encoders function change to filter 2 cutoff and resonance. Press again to go to page 3
(with no filter controls) and then once more to return to filter 1.
When controlling Mixer 14:2, you can scroll through pages of parameters to access EQ and send settings. To switch
between controlling channels 1-7 and 8-14 use the PAGE UP/DOWN buttons.
CUBASE AND NUENDO AUTOMAP
Cubase and Nuendo use the Automap Universal template (template 38) for mixer control, however some set up is required
in the sequencer before it will work:
1. Make sure you have the latest version of Cubase SX3/SL3/SE3/4/Studio 4 or Nuendo 3. If you need to update then
you can download the latest versions from www.steinberg.net.
2. Open Cubase/Nuendo and select ‘Device Setup’ from the ‘Devices’ menu.
3. In the ‘Device Setup’ window click '+' and add a 'Novation Automap Universal. Leave the MIDI Input and MIDI Output
‘not connected’.
Now run the Automap Universal Server software. The SL Compact will automatically switch to the Automap Universal
template. The mixer parameters will automatically be mapped to the SL Compact, unless an Automap-wrapped plug-in has
Automap focus, in which case you can switch to controlling the mixer by pressing and holding the SHIFT button (also labelled
DRUMPADS) and using the PAGE UP/DOWN buttons to select [Mixer].
21
Summary of Contents for ReMOTE SL COMPACT
Page 1: ...FA000 01...
