option for drumpads is not available if
Control
is set to PROG CHG.
BANK CHG (BANK CHANGE)
The
Ports, MidiChan
and
Name
settings are the same as for Control Change (CC) so see that section for information on
these settings.
BankMode:
This determines the format of the bank change message that is sent. CC numbers 0 and 32 are reserved for
bank selection in the MIDI Specification. CC0 messages are used for coarse bank selection (Bank MSB) and CC32 for fine
bank selection (Bank LSB). As an example, a synth may accept CC0 messages to select different categories of sounds e.g.
keyboard instruments, and then CC32 to select different sub-categories, e.g. acoustic piano. However, some synths do not
respond to CC0 messages and some do not respond to CC32 messages. You should check the manual for the synth to
which you are sending the bank change message to find out what the required format for bank change messages is, then
set
BankMode
accordingly to one of the following options:
LSB – A single CC32 message is sent, the value of which is determined by the
Banklsb
setting (see below).
MSB – A single CC0 message is sent, the value of which is determined by the
Bankmsb
setting (see below).
MSB-LSB – A CC0 message followed by a CC32 message is sent. The values are determined by the
Bankmsb
and
Banklsb
settings (see below).
Banklsb:
This determines the bank least significant byte value, i.e. the value of the CC32 message.
Bankmsb:
This determines the bank most significant byte value, i.e. the value of the CC0 message.
DRUMNOTE
This option only applies to the drumpads and allows you to set them up to send MIDI note data when hit. The velocity value
sent is always dependent on how hard you hit the drumpads and cannot be set to a fixed value. The
Ports, MidiChan
and
Name
settings are the same as for Control Change (CC) so see that section for information on these settings.
Note:
This is the same as for NOTE ON/OFF so see that section for information on this setting.
55
CONTROL
BANK CHG
BankMode
LSB
Bank lsb
0
Bank msb
|127
PORTS
ComnPORT
MIDICHAN
ComnCHAN
Change Case Numbers etc Name:
Upper
Lower
Punctu
« CHAR »
PAGE 2
PAGE 1
CONTROL
DRUMNOTE
Note
C-2
PORTS
ComnPORT
MIDICHAN
ComnCHAN
Auto-Off
NONE
Off Sync
TIMER
BtnType
STEP
Change Case Numbers etc Name:
Upper
Lower
Punctu
« CHAR »
PAGE 2
PAGE 1
Summary of Contents for ReMOTE SL COMPACT
Page 1: ...FA000 01...
