manualshive.com logo in svg

Novatel OEM615, Installation And Operation Manual

The Novatel OEM615 is an exceptional product designed for precise positioning applications. To effortlessly install and operate this advanced device, make sure to download the comprehensive "Installation And Operation Manual" from manualshive.com. This user-friendly manual is available for free download, ensuring a seamless experience with your Novatel OEM615.

Share
Download
background image

OEM6 Family Installation and Operation User Manual Rev 12

44

Chapter 3

Installation FlexPak6 & FlexPak6D Enclosures

This chapter provides instructions and guidelines for checking the contents of the shipping box, installing the 
NovAtel PC utilities on a computer and installing a NovAtel enclosure.

3.1

Shipping Box

The following is provided with the FlexPak6:

•

1 12 V power adapter cable

•

1 null modem serial cable

•

1 USB cable (

only)

•

1 I/O cable

•

2 SMA to TNC adapter cables (

 only)

•

Quick Reference Guide

Complete the following steps to connect and power your FlexPak6 or FlexPak6D.

3.2

Additional Equipment Required

For the receiver to perform optimally, the following additional equipment is required:

•

GNSS antenna (for a list of NovAtel GNSS antennas, see NovAtel’s active GNSS antennas provide 
precise phase centers and robust enclosures refer to our web site 

www.novatel.com/antennas

•

Power supply

3.3

Selecting a GNSS Antenna

An active antenna with an LNA is required to boost the power of the incoming signal to compensate for the 
line loss between the antenna and the receiver. 

NovAtel offers a variety of antennas, including single and dual-frequency, triple-band and wide-band 
reference GNSS antennas (refer to our web site: 

www.novatel.com/antennas

 for details of available 

antennas). All antennas include band pass filtering and an LNA. The GNSS antenna chosen depends on the 
particular application. Each model offers exceptional phase center stability and a significant measure of 
immunity against multipath interference. Each antenna has an environmentally sealed radome and all meet 
the European Union’s Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic 
Equipment (WEEE).

The FlexPak6 contains NovAtel’s OEM628 receiver card; the FlexPak6D contains NovAtel’s 
OEM617D receiver card.

When the OEM6 family receiver is installed in a permanent location, it should be protected by a 
lightning protection device according to local building codes (refer to the 

Lightning Protection 

Installation and Grounding Procedure

 on page 15).

Summary of Contents for OEM615

















































































































































































































Reviews:

No comments

Related manuals for OEM615

Voyetra Turtle Beach Montego II Quadzilla User Manual preview
Montego II Quadzilla
Brand: Voyetra Turtle Beach Pages: 56
Mode com MC-CR103 User Manual preview
MC-CR103
Brand: Mode com Pages: 12
Magtek ADYNAMO Programmer'S Reference Manual preview
ADYNAMO
Brand: Magtek Pages: 42
Super-RFID SP-S100 User Manual preview
SP-S100
Brand: Super-RFID Pages: 6
Contec PIO-16/16RL(PCI)H User Manual preview
PIO-16/16RL(PCI)H
Brand: Contec Pages: 63
Panasonic BN-SDCMAB Operating Instructions preview
BN-SDCMAB
Brand: Panasonic Pages: 2
Panasonic AJ-PCD35 Brochure preview
AJ-PCD35
Brand: Panasonic Pages: 2
Panasonic FZ-VNF551 Series Operating Instructions Manual preview
FZ-VNF551 Series
Brand: Panasonic Pages: 6
Panasonic FZ-VDM551 Series Operating Instructions Manual preview
FZ-VDM551 Series
Brand: Panasonic Pages: 6
Panasonic FZ-VNF401 Series Operating Instructions Manual preview
FZ-VNF401 Series
Brand: Panasonic Pages: 8
Panasonic AJ-PCD35 Operating Instructions Manual preview
AJ-PCD35
Brand: Panasonic Pages: 19
Panasonic AJ-PCD35E Operating Instructions Manual preview
AJ-PCD35E
Brand: Panasonic Pages: 19
Panasonic CF-VCRU11U Operating Instructions Manual preview
CF-VCRU11U
Brand: Panasonic Pages: 32
Panasonic au-xpd1 Operating Instructions Manual preview
au-xpd1
Brand: Panasonic Pages: 44
Panasonic AJ-PCD2G Operating Instructions Manual preview
AJ-PCD2G
Brand: Panasonic Pages: 88
Panasonic FZ-VSC552 Series Operating Instructions Manual preview
FZ-VSC552 Series
Brand: Panasonic Pages: 6
Panasonic FZ-VSC551 Series Operating Instructions Manual preview
FZ-VSC551 Series
Brand: Panasonic Pages: 8
Freescale Semiconductor C29x User Manual preview
C29x
Brand: Freescale Semiconductor Pages: 65

Brands by name

Popular brands

Load more brands