6.3. Models ASC-2/-6 V41
6. Cleaning, maintaining, and repairing
PROCEDURE
TIP
In general the device ist incorporated into a 19-inch rack. The bat-
tery can be accessed via the device’s side. For this purpose the
connections at the device’s rear have to be disconnected and the
device has to be pulled out from the 19-inch rack. If the device con-
tains a fiber laser then this procedure may be problematic due to
the integral laser fiber.
1. Stand facing the ASC’s aft.
2. Pull the right air filter cartridge toward you out from the ASC.
ASC-2 V41, ASC-6 V41: View on right side panel; air filter cartridge marked red
The battery can be accessed here:
ASC-2 V41, ASC-6 V41: Position of the battery access (marked red)
3. Remove the 2 screws (Torx, key size 6) and the battery cover which is
marked red in the following figure.
86
ASC_ARGNET-series_manual, 2022-02-15
Summary of Contents for ARGNET ASC-1
Page 6: ...Contents A 5 Declaration of conformity 99 vi ASC_ARGNET series_manual 2022 02 15...
Page 10: ......
Page 109: ......
