6.2. Model ASC-1
6. Cleaning, maintaining, and repairing
Interval
Measure
See
section
On
page
Replacing the battery for model for mod-
els ASC-2 V41, ASC-6 V41
6.2. MODEL ASC-1
6.2.1. REPLACING THE AIR FILTERS
TARGET AUDIENCE AND QUALIFICATION
Experts
HAVE READY
Air filters; see table A.1 on page 93
Flat-bladed screwdriver; width max. 5 mm
PROCEDURE
TIP
In general the device ist incorporated into a 19-inch rack. The air
filters can be accessed via the device’s sides. For this purpose the
connections at the device’s rear have to be disconnected eventually
and the device has to be pulled out from the 19-inch rack.
NOTICE
Insufficient ventilation
Overheating can result in function loss
• (Reference system: You are looking at the front panel.) Install
the air filter only on the right side. the left side must stay with-
out air filter.
80
ASC_ARGNET-series_manual, 2022-02-15
Summary of Contents for ARGNET ASC-1
Page 6: ...Contents A 5 Declaration of conformity 99 vi ASC_ARGNET series_manual 2022 02 15...
Page 10: ......
Page 109: ......
