Novanta ARGNET ASC-1, User Manual

Page: 53 / 110

4. Preparing for use 4.3. Installing
1
6
7
12
Connector type of the “safety” connector: 12 pin socket HARTING HAN DD
module 09 14 012 3101 with housing 09 14 001 0301
Table 4.10.: ASC-6 V41: Pin assignment of the “safety” connector
Pin Name Description
1 EM_EXT_LED Output signal “SFT (safety) board ready”;
24 V; max. 20 mA
Connect an emergency stop switch with:
2 EM_NCC_2 Normally closed contact; pin 2
3 EM_NCC_1 Normally closed contact; pin 1
4 EM_NOC_2 Normally opened contact; pin 2
5 EM_NOC_1 Normally opened contact; pin 1
6 GND Ground
7 PWR_OUT Output; 24 V; max. 2 A
Connect an interlock with:
8 IL_NCC_2 Normally closed contact; pin 2
9 IL_NCC_1 Normally closed contact; pin 1
10 LASER_ON_LED Output signal “laser on”; 5 V; max. 50 mA
11 REM_START_N Input signal “remote start”; brings the SFT
(safety) board back to ready state after a
non-auto-recoverable event; 24 V; max. 10 mA;
switches at 3 mA raising edge; negative pin
ASC_ARGNET-series_manual, 2022-02-15
43