Novanta ARGNET ASC-1, User Manual

Page: 82 / 110

5.5. Troubleshooting 5. Operating
PROCEDURE
1. If instances of the InScript software or ControllerLib are connected to the
ASC then exit these instances.
2. Press (hard) and hold the standby/on pushbutton (ARGES head) for at
least 2 seconds.
– OR –
On the display on page
Maintenance
in line
Controller
, click Halt ; see also
section 5.4.2 on page 70.
The blue light at the pushbutton starts a downwards motion and the dis-
play shows the message
Preparing power off
. All peripheral devices with
active device drivers will be shut down.
The system is down, when only one LED in the pushbutton is blinking
(standby).
3. Wait until the system is shut down completely. Turning the key switch
prematurely has no effect.
4. Turn the key to vertical position.
5. Remove the key from the key switch.
That way the ASC cannot be started by unauthorized personnel.
5.5. TROUBLESHOOTING
TARGET AUDIENCE AND QUALIFICATION
Operators and experts
72
ASC_ARGNET-series_manual, 2022-02-15