®
XS
240
SELF-PROPELLED TELESCOPIC PLATFORM
- The operating instruction sticker for the emergency lowering system is located on the
engine guard.
- The pressure for the emergency lowering system is produced with the electric pump, and
the system is controlled from the platform with control levers and by pressing continuously
the push-button of the emergency lowering pump.
- Control from the ground takes place correspondingly, but by using the control push-
buttons on the turntable and the control push-button of the pump.
- When the emergency lowering system is used, power must be switched on.
21.5
GENERAL CONDITION OF THE ACCESS PLATFORM
Visual inspection of condition
21.5.1 Chassis
-
Corrosion damage
-
Welds (there must be no visible breaks or cracks)
-
Permanent deformations
21.5.2 Slewing ring
-
Tightness of ring screws and joint (see manufacturer's instructions)
-
Slewing gear and holding of brake
-
Condition and gap of tooth ring
-
Bearing
-
Welds
21.5.3 Booms
-
Welds
-
Wear of joints
-
Lockings of joints and cylinders
-
Dents and tears
-
Permanent deformations
-
Bars and screws of stabilizing equipment
-
Cylinders
-
Slide pads and adjustments
21.5.4 Platform
-
Fixing organs
-
Lockings of joints
-
Tears and other damage
-
Condition and self-closing of gate
-
Access routes and railings
55
Summary of Contents for XS240
Page 1: ...XS240 SELF PROPELLED TELESCOPIC PLATFORM OPERATION MAINTENANCE...
Page 6: ...XS 240 SELF PROPELLED TELESCOPIC PLATFORM 4 SPECIFICATION Figure 3 Specification 5...
Page 10: ...XS 240 SELF PROPELLED TELESCOPIC PLATFORM 5 1 NOSTOLIFT XS 240 BOOM GEOMETRY 9...
