®
XS
240
SELF-PROPELLED TELESCOPIC PLATFORM
A B
Figure 25. Adjustment of closing time of brakes
1.
Set the Access Platform to transport position.
2.
Remove the cover of the valve group on the lower chassis (aluminium nodule
plate cover closest to the turntable on the lower chassis).
3.
Run hydraulic oil to a temperature of +30°C.
4.
Check tyre pressure = 310 kPa.
5.
Select a hard, level surface on which to drive: concrete, tarmac, or the like.
6.
Drive the Access Platform at a fast speed.
7.
Release the drive joystick quickly to the middle position.
8.
Adjust the stopping distance of the Access Platform to approx. 1 m by valves
A and B (figure 25). When adjusting, both valves must show the same value,
see valve scales.
9.
When the valve is turned to the + direction, the stopping distance becomes
shorter.
NOTE! IF THE VALVE IS TURNED TO THE MINUS DIRECTION
(COMPLETELY CLOSED), THE BRAKES DO NOT CLOSE.
19.9.4 Boom chains - adjustment and maintenance
The two outermost boom extensions of Nostolift XS 240 (the extensions closest to the
platform) are moved by chains.
47
Summary of Contents for XS240
Page 1: ...XS240 SELF PROPELLED TELESCOPIC PLATFORM OPERATION MAINTENANCE...
Page 6: ...XS 240 SELF PROPELLED TELESCOPIC PLATFORM 4 SPECIFICATION Figure 3 Specification 5...
Page 10: ...XS 240 SELF PROPELLED TELESCOPIC PLATFORM 5 1 NOSTOLIFT XS 240 BOOM GEOMETRY 9...
