Nostolift XS240, Operation & Maintenance Manual, Page: 42 / 75

®
XS
240
SELF-PROPELLED TELESCOPIC PLATFORM
19.5 SERVICE PROGRAMME FOR DIESEL ENGINE
Daily with the Check for oil and fuel leakages, repair leakages before use.
engine switched Check engine oil level and cleanliness. Add oil, if needed.
off Check the amount of coolant.
NOTE
!
NEVER OPEN THE RADIATOR
FILLING CAP OF A HOT ENGINE
.
LET THE ENGINE COOL AT LEAST
30
MINUTES AFTER USE BEFORE OPENING THE CAP
. Add coolant, if
needed.
Check for loose bolts and nuts and tighten if needed.
Daily with the Listen to the sound of the engine. Stop the engine if:
engine switched
on - The rpm of the engine reduces or increases suddenly (the
engine does not run smoothly).
- There is unusual interference noise.
Check the colour of exhaust gas. Stop the engine if the exhaust
gas suddenly turns black.
Stop the engine if the indicator light for oil pressure or
overheating of coolant are lit while the engine is running.
After first 50h of
operation Change engine oil and oil filter.
Every 50h Check fuel pipes and hoses, tightness of their connections and
condition of hose clamps.
Every 100h Clean the air filter element.
Clean the fuel filter.
Check the battery electrolyte level.
Check the fan belt tightness and condition.
Every 200h Change engine oil and oil filter.
Check the condition of radiator hoses and hose clamps.
Every 400h Replace the fuel filter element.
Every 500h Clean the radiator system and radiator cell and check the
condition of radiator.
Remove potential accumulations from the fuel tank.
Replace the fan belt.
Every 800h Adjust valve clearances.
41