Nostolift XS240, Operation & Maintenance Manual

Page: 45 / 75

®
XS
240
SELF-PROPELLED TELESCOPIC PLATFORM
10. Pivoted axle bearings of wheels
11. Sliding surfaces of brake cylinders
12. Articulation bearings of platform slewing cylinder
13. Pivot bearing and tooth ring. Too much grease can break the gasket of pivot
bearing. Lubricate every 950 hours or at least every 6 months. There are two
lubrication points in the bearing. Turn the bearing while greasing. The cover of
the lubrication opening of the pivot bearing and tooth ring is attached with 2
bolts.
14. Articulation bearings of stabilizer arm
15. Articulation bearings of load control linkage
16. Articulation bearings of platform inclining cylinder
17. Platform load control linkage
19.7 SELECTION OF LUBRICANTS, OIL VOLUMES
19.7.1 Kubota V1505
Oil volume.....................................................................................6.0 l with filter
SAE 30 or SAE10W-30, SAE10W-40...........................................over +25°C
SAE 20 or SAE10W-30, SAE10W-40...........................................0°C ... +25°C
SAE 10W or SAE10W-30, SAE10W-40........................................below 0°C
19.8 HYDRAULICS
Oil volume.....................................................................................60.0 l, filling volume
Oil grade........................................................................................UNIVIS 32
19.8.1 Articulation bearings
- Lithium-based all-round grease e.g. Esso Beacon EP2
- Lubrication instruction: must ooze out a little during greasing
19.8.2 Open cogging of pivot bearings
- Molybdenum-sulphide-based, e.g.
- Esso Surrent Fluid 30F
- Shell Cardium EP Fluid H
- Mobil Dorcia 30
- Lubrication instruction: apply
19.8.3 Sliding surfaces of boom
- Lithium-based all-round grease e.g. Esso Beacon EP2
19.8.4 Slide bearings
44