®
XS
240
SELF-PROPELLED TELESCOPIC PLATFORM
activated. Once this safety limit has activated, the booms must be brought to the normal
operating range by starting the engine and running in the booms. There is no risk of
tipping over even within the operating range of the backup safety limit.
13.4
CHECKING THE LIFTING RADIUS
Figure 13 Checking the lifting radius
Figure 14. Point B, check mark
1. While operating the Access Platform from the ground operating point, raise the boom
with an empty platform and jib extended all the way up.
2. With the boom raised all the way up, extend the boom extensions fully out with the
telescope (figure 13, position 1).
3. Then lower the boom with the lowering push-button until the load control stops the
movement (figure 13, position 2).
4. Check that the turntable indicator is between the min. and max. markings of the boom.
28
Summary of Contents for XS240
Page 1: ...XS240 SELF PROPELLED TELESCOPIC PLATFORM OPERATION MAINTENANCE...
Page 6: ...XS 240 SELF PROPELLED TELESCOPIC PLATFORM 4 SPECIFICATION Figure 3 Specification 5...
Page 10: ...XS 240 SELF PROPELLED TELESCOPIC PLATFORM 5 1 NOSTOLIFT XS 240 BOOM GEOMETRY 9...