Norwood Kwik-Till HSD2500, Operator'S Manual

Page: 97 / 154

5 - MAINTENANCE
5-5
MAINTENANCE CHART
Replace
Cleaning
Change Fluid / Repack
Adjust
Drain Fluid
Check
Grease
Interval Page # Maintenance Action
# of
Pts.
First 10 Hours Of
Operation
5-6
Re-Torque Wheel Flange Nuts
40 X
5-7 Check Tightness Of All Bolts, & Cap Screws X
DAILY
5-8 Check For Hydraulic Leaks X
5-9
Check For Damaged Hydraulic Hoses,
Adapters, Crossovers, Junctions, & Hydraulic
Cylinders
X
5-10
Check Tire Pressure
4
X
5-11
Check Rubber Roller Scraper Alignment If
Equipped With The Rubber Roller Basket
X X X
WEEKLY
5-15
Re-Torque Wheel Flange Nuts
X
5-16
Check Tightness Of All Bolts, & Cap Screws X
5-17
Check Pivot Bushings For Wear
68 X
5-19
Check For Gap At Pivot Bushing Caps X
5-20
Grease Hitch Link Articulating Ball
2 X
MONTHLY
5-21
Check Disk Hub Nuts (Re-Torque If Needed) X X
5-22
Check Disk Shank Cord Alignment X X
5-24
Lubricate Wheel Hubs X
ANNUALLY
5-25
Check Disks For Damage And / Or Excessive
Wear
X
5-26 Check Wheel Bearings X
5-27 Check Disk Hubs For Excessive Wear X
5-29
Check Accumulator
X
5-30 Check Rear Roller Hubs For Wear X
AS REQUIRED
5-31
Clean and Wash the Machine X
5-32 Replace Pivot Bushings X
5-33 Repack Wheel Bearings X
5-35
Replace Rear Roller Hubs
X