Norwood Kwik-Till HSD2500, Operator'S Manual

Page: 77 / 154

4 - WORKING OPERATIONS
4-11
KWIK-TILL FOLDING & UNFOLDING
Follow the steps in Kwik-Till Unfolding (See Below) & Kwik-
Till Folding (See “Kwik-Till Folding” on page 4-15) to properly
unfold the Kwik-Till from the transport position, and fold the
Kwik-Till from the field position.
Kwik-Till Unfolding
1. If the Kwik-Till is already attached to the tractor, proceed to
step # 2, if not already attached to tractor.
(See “Attaching
Kwik-Till To Tractor” on page 3-9)
2. Transport the Kwik-Till onto level ground.
(See Fig. # 4-25)
Fig. # 4-25 Kwik-Till Shown In The Transport Position
WARNING
Before disconnecting equipment, servicing, adjusting,
or repairing
:
Park on a level surface, engage park brake, place
transmission in PARK, shut off engine, remove key, and wait
for all moving parts to stop before leaving the tractor cab.
IMPORTANT
Always return the transport locks in the stowed position on
the Kwik-Till when not in use.
3. Remove the Transport Locks
A
from the Locked Po-
sition
B
and install into the
Stowed Position
C
. (See
Fig. # 4-26)
Fig. # 4-26 Transports Lock Shown In Locked Position
A
B
D
C A
Fig. # 4-27 Transports Lock Shown In Stowed Position
B
A
D
B C A