Norwood Kwik-Till HSD2500, Operator'S Manual

Page: 117 / 154

5 - MAINTENANCE
5-25
ANNUALLY
Check Disks For Damage And / Or Excessive
Wear
1. Fold the machine into the Transport Position . (See
“Kwik-Till Folding & Unfolding” on page 4-11)
WARNING
When servicing the machine in the transport position, the
wings must be secured with the transport locks.
2. Make sure the Transport Locks
A
are moved from
the Stowed Position
C
, and installed into the Locked
Position
B
.
(See Fig. # 5-28)
Fig. # 5-28 Transports Lock Shown In Locked Position
A
B
D
C A
3. Check all disks on the machine . (See Fig. # 5-29)
A
Fig. # 5-29 Check All Disks On The Machine
4. Replace damaged disks or disks that are worn 2.0 in
(50.8 mm) smaller than their original diameter.
( Note:
Norwood recommends replacing at 2.0 in (50.8 mm) wear
for optimum performance.)
NOTE
Blades wear differently depending on conditions and proper
operation.
A
Fig. # 5-30 Replace Damaged Disks Or Disks That Are
Worn