Norwood Kwik-Till HSD2500, Operator'S Manual

Page: 101 / 154

5 - MAINTENANCE
5-9
DAILY
Check For Damaged Hydraulic Hoses, Adapt-
ers, Crossovers, Junctions, & Hydraulic Cylin-
ders
1. Unfold the machine into the Field Position .
(See “Kwik-
Till Folding & Unfolding” on page 4-11)
2. Lower the disks to the ground by retracting the Front
Wheel Cylinders
A
and Rear Roller Cylinders B .
(See Fig. # 5-9)
A
B
Fig. # 5-9 Lower Disks to the Ground
3. Relieve all the hydraulic pressure by placing the tractor
SCV levers to the FLOAT POSITION with engine
running for the Main Frame Lift & Wing Fold cylinders.
4. The machine should now be in the “Field Lowered Po-
sition”
(See Fig. # 3-53)
.
5. Visually check for damaged Hydraulic Hoses
A
, Adapt-
ers
B
, Crossovers C , Junctions,
D
, & Hydraulic
Cylinders
E
.
(See Fig. # 5-10) (See Fig. # 5-11) (See
Fig. # 5-12)
A
B
B
Fig. # 5-10 Check For Damaged Hydraulic Hoses, & Adapt-
ers
C
E
C
B
Fig. # 5-11 Check For Damaged Adapters, Crossovers, &
Hydraulic Cylinders
D
Fig. # 5-12 Check For Damaged Junctions