Operation Instruction
45
2.17.10 Cab HVAC
There are four HVAC outlets inside the cab. You may adjust the air flow rate and direction by adjusting the
vents on each outlet. On the left of the ceiling panel is the HVAC control panel. The control methods are
as follows:
2.17.10.1 Individual Ventilation Control
Switch off the outlet/inlet switch of the heater on the engine.
Adjust the air flow with the fan switch in the middle of
operator panel until you have the desired level of ventilation.
Figure 2-53 Air Conditioner
2.17.10.2 Air Conditioner Control
Switch off the outlet/inlet switch of the heater on the engine.
Switch on the compressor on the extreme left of the control panel.
and; the air conditioning will then cool the cab.
Turn the temperature control switch for the air conditioner on the
right of the control panel to adjust the temperature.
Turn the fan switch in the middle of the control pannel to change
the amount of cold air supplied. Figure 2-54 Air Conditioner Control Panel
2.17.10.3 Heater Control
Switch off the AC compressor on the extreme left of the control panel.
Turn on the inlet/outlet switch for the heater on the engine. Hot water will circulate through the heater,
increasing the temperature in the cab.
Turn the fan switch in the middle of the control pannel to increase and decrease the amount of air flow.
Summary of Contents for 82XTC
Page 53: ...Electrical Schematic 47...
Page 117: ...TD80 Serials TD824 1F461D19K...