Safety Precautions
5
Never approach the PTO shaft when it is running. Never take sudden turns when the PTO shaft is
under load, as this can damage the universal joint or the PTO shaft. When the PTO shaft is not
in use, the PTO lever should be returned to the neutral position.
3.
After parking and before shutting down the tractor, the driver should remove the key from the ignition,
set all gearshift levers to the neutral position, and lock the brake han dle. This will prevent the
tractor from accidental startup and unattended movement .
4.
When parking the tractor on an incline, the auxiliary brake should be engaged and the engine shut down.
Put the tractor in gear, apply the auxiliary brake and use the triangle chocks to block the rear wheels.
5.
Tire installation and adjustment should be done by trained personnel only, using special tools.
Faulty tire installation may cause a serious accident or damage.
6.
When cleaning the radiator, shut down the tractor and allow the tank to cool for 30 minutes.
7.
Pay attention to all safety precautions when replacing or installing new parts on your tractor.
IMPORTANT ISSUES:
1.
Always operate the tractor according to the specified breaik-in requirements. This will prolong the life
of your tractor.
2.
Prior to starting the tractor, the oil system, cooling system and electric circuits must be examined.
After startup, strict attention should be paid to the various instruments.
3.
Before activating the power take-off (PTO) shaft, make sure that the equipment is properly inspected.
When using PTO driven implements, the angle between the PTO shaft and the universal joint drive shaft
should be no more than a 15° angle; and the hydraulic operating control should be in neutral. After the
farm tool has been lifted, the included angle between the PTO shaft and the universal joint drive shaft
should be at no more than a 20° angle. Never use the implement without checking for a proper connection
with the PTO. This can cause damage to the implement and severe damage to the tractor clutch and power
train. To increase work efficiency, the power supply should never be shut off during a turn, and the lifting
Summary of Contents for 82XTC
Page 53: ...Electrical Schematic 47...
Page 117: ...TD80 Serials TD824 1F461D19K...
