![background image](http://html.mh-extra.com/html/northern/n-1000-iii/n-1000-iii_installation-and-programming-manual_1708226061.webp)
N-1000-III/IV
6-6
6-6
6-6
6-6
6-6
Section 6: Wiring Requirements
Section 6: Wiring Requirements
Section 6: Wiring Requirements
Section 6: Wiring Requirements
Section 6: Wiring Requirements
Tan Earth Ground wire connections (Not used on all keypads).
If the keypad is mounted directly on grounded metal, tie the tan wire to the
grounded metal and tie the keypad cable shield to the N-1000-III/IV grounding
point (float shield at keypad).
If the keypad is mounted on ungrounded metal or nonmetallic material, tie the tan
wire to the keypad cable’s shield only and connect the shield to the N-1000-III/IV
ground point.
Figure 6-5.
Eleven Conductor Keypad Connection to the N-1000-III/IV.
If the
keypad is mounted on ungrounded metal or nonmetallic material, tie the tan wire to the keypad
cable’s shield only and connect the shield to the N-1000-III/IV ground point.
N-1000-III
Lock Solenoid
Earth Ground
+ 5 VDC
1 2 3 4
Eleven conductor keypad to N-1000 III/IV use
Keypad Cable NC18121 (11 conductor, 18 gauge
shielded cable); Maximum distance: 500' (152 m).
Red wire to TB5 terminal 4
(N-1000-IV Red wire to te 5 VDC on any terminal block)
Tan wire
Shield
1 Brown
2 Blue
3 Green
4 Black
5 Gray
6 Purple
7 Yellow
8 Orange
9 Pink/Peach
10 White
TB8
TB5