![background image](http://html.mh-extra.com/html/northern/n-1000-iii/n-1000-iii_installation-and-programming-manual_1708226100.webp)
Appendix A: Quick Reference Guide
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
A–19
T Command
T Command
T Command
T Command
T Command
Function: Sets control panel time.
Syntax:
_
T
=pn_hh:mm <CR>
Example:
_
T
=Ø_17:45
The time is set to 5:45 P.M. in all panels.
V Command
V Command
V Command
V Command
V Command
Sub-
Sub-
Sub-
Sub-
Sub-Command 1
Command 1
Command 1
Command 1
Command 1
Function:
Assigns shunt times and time zones to input points
WITH
special options.
Syntax:
_
V
=pn_
I
_input_shunt time_tz[_
1
][_
A
_durA[_tzA]][_
B
[_tzB]][_
C
]
[_
D
_deb][_
K
_relock][_
S
[_tzS]][_
X
][_
N
_name][_
Y
[_tzY]]<CR>
User
options:
1: Disable alarm/normal messages, but transmit trouble messages
A: Acknowledge required
B: Buffered mode activation
C: Clear options
D: Debounce
K: Enable auto-relock
S: Disable alarm/normal messages
X: Reverse alarm/normal states
N: Name input point
Y: Disabling response to interlock by time zone
Example:
Alarm Acknowledge message without time zone
Input 5 (motion detector) monitors a secure area. You want the input
to be shunted (de-activated) during Time zone 20 for free access. Input
shunt time is not applicable. You want alarm acknowledge message
activation.
Command: _
V
=1_I_5_Ø_2Ø_
A
_1Ø
Result: Input 5 is shunted during Time Zone 20 and is assigned a shunt
time of 0 (not applicable). When Input 5 goes into alarm condition, an
alarm acknowledge message is sent to the system monitor and/or
printer. The message is transmitted every 10 seconds until acknowledged
with the following command: _
O
=1_
I
_5_
A