A–14
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
Appendix A: Quick Reference Guide
the card number, followed by 1 stop bit. The resulting site code
and card number are concantenated to form one card number,
which is sent to the head end software as a 12-digit number.
NOTE: A special format is requires. Refer to F Command,
Sub-Command 3.
Application Note:
For simplicity of system management, it is
recommended that you set the site code value to Ø when the
OJ Option is used.
OL: Create Wiegand card numbers by concantenating site code with
card number. The result is transmitted as a 12 digit number.
ON:
Normals are reported when coming out of time zone shunt
OP:
Switches the Power Fail Input from Input Point 8 to Input Point
19 (_
OP
_
19
_
S
) or from Input Point 19 to Input Point 8
(
_OP_Ø
). NOTE: Redirecting the Power Fail to Input 19 reclaims
Input 8 as a normal input on the AEP-5 board only. However, this
change will disable the AEP-5 Board Present/Functioning alarm.
P:
Personal identification numbers (PIN)
R:
Restart
S:
Supervisory Board (Not for use with N-1000-III/IV)
U:
The number of cards panel should set itself for
V:
Visitor cards
Y:
Long format ABA cards
Z_Ø:
Split time zone
Z_tzn: All cards with time zone numbers higher than the number
indicated will use the next higher time zone at Reader 2. At
Reader 1 they will use the time zone attached to the card num-
ber.
Global Specification
Control panels MUST be initialized on an individual basis. The global specification
(pn=Ø) is NOT allowed with the I command.
L Command
L Command
L Command
L Command
L Command
Function:
Define time zones.
Syntax:
_L
=pn_tz_h1:m1-h2:m2_days [tz link]<CR>
Comment: Time zone definition consists of a reference number, start time, end
time, day(s) of week specification and optional link number. The end
period of a time zone goes until the last second of the last minute (e.g.,
8:00-17:00–at 17:01 the door is locked).
A time zone definition alone causes no action. Time zones must be
assigned to cards/keycodes, input points or output points to cause
action.