Appendix A: Quick Reference Guide
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
A–7
Sub-
Sub-
Sub-
Sub-
Sub-Command 3
Command 3
Command 3
Command 3
Command 3
Function:
Deletes single or multiple code(s) from memory.
Syntax:
_C
=pn_code<CR> or
_C
=pn_code1-code2
_Ø
<CR>
Example:
_
C
=1_25Ø-299_Ø
Codes 250-299 are deleted from memory in panel 1.
Sub-
Sub-
Sub-
Sub-
Sub-Command 4
Command 4
Command 4
Command 4
Command 4
Function:
Generate code database reports based on user-selected parameters.
Syntax:
_C
=pn_{
L_
limit |
N
|
R
|
U
|
Z_
tz} [_code]<CR>
User
options:
L: Limited Use/Visitor status specification
N: IN status
R: Full report
U: OUT status
Z: time zone specification
Example:
_C=1_L_3_1ØØØ-12ØØ
The returned report includes only those codes from 1000 to 1200 with
three or fewer uses remaining in Panel 1.
Sub-
Sub-
Sub-
Sub-
Sub-Command 5
Command 5
Command 5
Command 5
Command 5
Function:
Manually set anti-passback IN/OUT code status.
Syntax:
_C
=pn_{
I
|
O
}_card #<CR>
User
options:
I:
Set IN status
O: Set OUT status
Example:
Reset code
Cardholder 750 enters the building in the morning via the In reader (on
Panel 1, Device 1) and exits without using the Out reader (Panel 1,
Device 2) in the evening. The following morning, the cardholder is
denied access at the In reader (anti-passback violation).
The system operator enters the following command to set the status of
Card 750 to OUT:_
C
=1_
O
_75Ø
Card 750 is then allowed entry at the In reader.