![background image](http://html.mh-extra.com/html/northern/n-1000-iii/n-1000-iii_installation-and-programming-manual_1708226023.webp)
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
N-1000-III/IV
4–6
4–6
4–6
4–6
4–6
Section 4: P
Section 4: P
Section 4: P
Section 4: P
Section 4: Panel L
anel L
anel L
anel L
anel Layout
ayout
ayout
ayout
ayout
4-3: Terminal Block 5
Terminal Block 5
(N-1000-III only)
supports the interface to two Wiegand
output card readers and provides an alarm point common. Each card reader port
includes terminals for LED control, Data 1 signal, Data Ø signal, +5 VDC output
and Ground. Figure 4-5 illustrates typical wire color terminations. Refer to
Reader Installation Tech Bulletin (included with the reader) for most recent color
terminations. Refer to Section 6 for specific card reader wiring/installation
details.
Terminal
Function
Reader Wire Color
1
Card Reader 1: LED (Aux. Output 11)
Brown
2
Card Reader 1: Data 1
White
3
Card Reader 1: Data Ø
Green
4
Card Readers 1 & 2: +5 VDC
Red
5
Card Readers 1 & 2: Ground
Black
6
Card Reader 2: Data Ø
Green
7
Card Reader 2: Data 1
White
8
Card Reader 2: LED (Aux. Output 12)
Brown
9
Alarm Point Common*
10
LED/Buzzer 3 (Aux. Output 13)
11
LED/Buzzer 4 (Aux. Output 14)
12
Earth Ground for Cable Shields
Shield
*All N-1000 alarm point commons are electrically the same and can be used with
any panel alarm point.
4-4: Terminal Block 6
Terminal Block 6 contains alarm input points 5-16 terminals. Any N-1000 alarm
common can be used with the alarm inputs. (See Figure 4-5.)
TB6 Terminal
Function
1
Alarm Input 5 (Door 1 Egress)
2
Alarm Input 6 (Door 2 Egress)
3
Alarm Input 7 (Door 3 Egress N-1000-IV)
4
Alarm Input 8 (Door 4 Egress N-1000-IV)
5
Alarm Input 9
6
Alarm Input 10
7
Alarm Input 11
8
Alarm Input 12
9
Alarm Input 13
10
Alarm Input 14
11
Alarm Input 15
12
Alarm Input 16