Northern Meditec Crius V6, Operator'S Manual

Page: 72 / 182

72 / 182
rate(RR).
In VC-ACV mode, you need to set the following ventilation parameters:
1. [Pmax]: Can prevent high airway pressure caused by patient
2. [PEEP]: Positive end-expiratory pressure
3. [Vt]: Tidal volume
4. [I:E]: Inspiration tiem
5. [Rate]: Breathing frequency
6. [Tpause]: Percent of inspiratory pause time
7. [Trigger]: Inspiration trigger level
8. [O
2
%]: Oxygen concentration.
In VC-ACV mode, you can set the following sigh function parameters as required:
1. [ Sigh ]: Switch for turning on sigh function
2. [ Interval ]: Number of sigh cycles
3. [Delta VT]:
Tidal volume
of sigh cycles
In VC-ACV mode, you can set the following ATRC function parameters as required in Invasive
ventilation (this function is applied to all Invasive modes and the description is not repeated in
the other ventilation modes section in this manual.):