Northern Meditec Crius V6, Operator'S Manual

Page: 57 / 182

57 / 182
Chapter 5 System Settings
5.1 Display Settings
5.1.1 Interface
1. Select [Menu]
→
[System Setting ]
→
[ Setting ].
2. Set [Layout] as required to select the type of interface you want to display.
 【
Normal
】
: Display the main interface.

【
Big Font
】
: Display large font interface.

[All Params]: display the full parameter monitoring interface.

[Big Loop]: Display large loop interface.
5.1.2 Waveforms
1. Select [Menu]
→
[System Setting ]
→
[ Setting ].
2. Select [ Wave mode ] and toggle between [Scan] and [ Fill ].

[Scan]: the waveform is displayed as a curved line.

[ Fill ]: the waveform is displayed as a filled area.
5.2 Set Unit
5.12.1 Set Pressure Unit
1. Select [Menu]
→
[System setup]
→
[Setting].
2. Set [Pressure Unit ] among [MPa], [PSI], [bar].
5.12.2 Set Paw Unit
1. Select [Menu]
→
[System setup]
→
[Setting].
2. Select [ Paw Unit ] among [ cmH
2
O ], [K Pa ], and [ mbar ].
5.3 IBW/Height
1. Select [Menu]
→
[System setup]
→
[Setting].
2. Select [IBW/Height] : [IBW] and [Height].
3. VT/IBW.select 6~8mL/Kg.