Northern Meditec Crius V6, Operator'S Manual

Page: 175 / 182

175 / 182
which it will be used.

The ventilator needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided below.

Other devices may interfere with this equipment even though they meet the
requirements of CISPR.

When the input signal is below the minimum amplitude provided in technical
specifications, erroneous measurements could result.

Use of portable or mobile communications devices can degrade the performance of
the equipment.
Guidance and manufacture’s declaration - electromagnetic emissions
The Crius V6 ventilator is intended for use in the electromagnetic environment specified below. The
customer or the user of the Crius V6 ventilator should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The Crius V6 ventilator uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The Crius V6 ventilator is suitable for use
in all establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
Complies
Guidance and manufacture’s declaration - electromagnetic immunity
The Crius V6 ventilator is intended for use in the electromagnetic environment specified below. The
customer or the user of the Crius V6 ventilator should assure that it is used in such an environment.
IMMUNITY test IEC 60601 test level Compliance level
Electromagnetic
environment- guidance