Northern Meditec Crius V6, Operator'S Manual

Page: 108 / 182

108 / 182
9.7.1 Switching on O2 Therapy
WARNING

The device must only be used under the supervision of qualified medical staff, so that
help is immediately available if malfunctions occur or the patient has insufficient
spontaneous breathing.
1. Select the [ Standby ] key to enter Standby status after confirmation.
2. Select [ O
2
Therapy ] in the Standby status to enter O
2
therapy screen.
3. Set [ Flow ]
、
[ O
2
% ] and [ Pmax ] to appropriate values as required.
9.7.3 O2 Therapy Timer
Select the O
2
Therapy Timer area in the top left corner to access the window as shown below.
Select [ Stop]/ [Start ] to stop or start timing. Select [ Reset ] to reset the displayed time of the
timer.