Nortel SMC 2450, Implementation Manual

Page: 96 / 262

Page 96 of 260 Installation and configuration
553-3001-225 Standard 1.00 May 2006
7 Enter a password to be used to encrypt sensitive data in the configuration
file. You will need this password to be able to restore the configuration
later.
Note: Nortel recommends that you record the password used to encrypt
sections of the configuration file.
8 Click Export .
The File dialog box is displayed.
9 Select the location to store the file.
10 Specify a file name.
11 Click Ok .
End of Procedure
Result: The configuration is downloaded and saved in the file at location
specified. You can view the configuration using a standard text editor.
Procedure 16
Enabling TFTP
TFTP and FTP are disabled by default. If you want to use TFTP or FTP to save
or restore the configuration, the TFTP ALG needs to be enabled.
1 Enter
/cfg/smc/settings/alg/tftp y
End of Procedure
Result : The TFTP ALG is enabled. The Web UI does not use TFTP;
however, you can turn on the TFTP ALG in the Web UI at the Multimedia
Security > Security Settings > ALG > TFTP page.
Procedure 17
Saving the current configuration using the CLI
1 Enter
/cfg/ptcfg
to start the save (put) configuration wizard.
2 Select the protocol when prompted. The default is TFTP.
The protocol options are: TFTP, FTP, SCP, or SFTP.
3 Enter the hostname or IP address of the server.