manualshive.com logo in svg

Nortel SMC 2450, Implementation Manual

Share
Download
Nortel SMC 2450 Implementation Manual Download Page 232

Page 232 of 260

Appendix D: Software licenses

553-3001-225

Standard 1.00

May 2006

THIS SOFTWARE IS PROVIDED BY RALF S. ENGELSCHALL “AS IS” 
AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, 
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
ARE DISCLAIMED. IN NO EVENT SHALL RALF S. ENGELSCHALL 
OR HIS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGE.

OpenSSL and SSLeay Licenses

LICENSE ISSUES

The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the 
OpenSSL License and the original SSLeay license apply to the toolkit. See 
below for the actual license texts. Actually both licenses are BSD-style Open 
Source licenses. In case of any license issues related to OpenSSL please 
contact [email protected].

OpenSSL License

Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

1

Redistributions of source code must retain the above copyright notice, 
this list of conditions and the following disclaimer. 

2

Redistributions in binary form must reproduce the above copyright 
notice, this list of conditions and the following disclaimer in the 
documentation and/or other materials provided with the distribution.

Summary of Contents for SMC 2450







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands