Nortel SMC 2450, Implementation Manual

Page: 137 / 262

Secure UNIStim deployment Page 137 of 260
Secure Multimedia Controller Implementation Guide
Procedure 36
Viewing the security keys
1 Log on the Web UI.
2 Navigate to the Multimedia Security > UNIStim Security > Private
Keys >Display private key/public key/fingerprint page.
3 Select one of the following options to display the generated keys:
• Private Key
• Public key
• Public key fingerprint
End of Procedure
Result : The security key is displayed.
Verifying the IP phone connection
Using the Web UI, you can check whether a phone is connected in secure or
non-secure mode.
Procedure 37
Verifying the IP phone connection
1 Log on the Web UI.
2 Navigate to the Administration > Monitor > Unistim Security > Client
page.
End of Procedure
Result : The page displays all the connected phones with IP addresses,
firmware details, and whether it is in secure or non-secure mode.
Troubleshooting Secure UNIStim
When Secure Unistim is enabled on the SMC, the change of IP Clients from
insecure to secure does not happen immediately. You can view the IP client
security status at the
Administration > Monitor > UNIStim Security >
Client page in the Web UI.