Nortel SMC 2450, Implementation Manual

Page: 191 / 262

The Command Line Interface (CLI) Page 191 of 260
Secure Multimedia Controller Implementation Guide
nslookup
<host name>
<IP address> Finds the IP address or host name of a network device.
To use this command, you must configure the SMC to use a DNS server.
If you did not specify a DNS server during the initial setup procedure, you
can add a DNS server at any time by using the
/cfg/sys/dns/add
command.
paste Sets a password for restoring a saved configuration dump file that
includes encrypted private keys.
ping
<address> <tries>
<delay> Verifies station-to-station connectivity across the network.
pwd Displays the command path used to reach the current menu.
revert Cancels all pending configuration changes.
traceroute
<address>
<max-hops>
<delay> Identifies the route used for station-to-station connectivity across the
network.
verbose <n> Sets the level of information displayed on the screen:
0 = Quiet: Nothing appears except errors—not even prompts.
1 = Normal: Prompts and requested output are shown, but no menus.
2 = Verbose: Everything is shown.
Table 16
Global CLI commands
Command Description