Nortel SMC 2450, Implementation Manual

Page: 84 / 262

Page 84 of 260 Installation and configuration
553-3001-225 Standard 1.00 May 2006
c. Enter the network mask.
d. Enter the gateway IP address.
12 Configure the cluster settings.
a. Set the time zone.
i. Select your continent or ocean.
ii. Select your country.
iii. Select your region.
b. To set the current date, choose one of the following:
— Enter the current date.
— Press <Enter> to accept the default.
c. To set the current time, choose one of the following:
— Enter the current time.
— Press
yes
to generate a new Secure Shell (SSH) host key.
Note: Nortel recommends that you generate a new SSH key to maintain
a high level of security when connecting to the SMC using an SSH client.
For more information about SSH, see “Using Secure Shell (SSH)” on
page 185 .
d. Enter a password for the administrator.
Note: You can optionally enter a new password for the admin user or you
can enter and keep the default password if desired, and then change the
password when the SMC is operating as desired.
e. Reenter the password.
13 Enter
yes
to run the quick setup wizard.
WARNING
When you change the default password, Nortel strongly
recommends that you record the new password.
Passwords are not recoverable; if a password is lost, you
must reinstall the SMC.