Nortel SMC 2450, Implementation Manual

Page: 253 / 262

Appendix E: SMC packet filter log messages Page 253 of 260
Secure Multimedia Controller
Log message table
The following table describes log messages generated by SMC. It also
specifies the log category of the respective event.
Table 27
Log messages
Default Enable Category
System Boot Complete This log message is generated when the system start-up
procedure is complete.
Wed Jun 23 17:15:10 2004 id=firewall
time="2004-06-23 17:11:23" fw=a10-10-10-10 pri=6
mid=450 mtp=0 msg="Device Boot/Initialise
procedure completed" agent=Firewall
System Error Messages
Resource Limit Reached This log message indicates that respective direction's connection
table to be reached, and no additional connections can be made in
that direction.
Apr 29 20:07:53 172.16.7.225 id=firewall
time="2004-04-29 14:50:53" fw= a10-10-10-10 pri=1
proto=6(tcp) src=172.16.8.226 dst=172.16.7.224
mid=2080 mtp=2048 msg="Rate-Limiting: Max
Connection Limit reached Src 45127 Dst 23 from
ext n/w" ruleid=27 agent=Firewall
Maximum Packet Rate
Reached This log message indicates that the maximum packet rate is
reached and no extra packets are allowed.
Apr 29 19:53:28 172.16.7.225 id=firewall
time="2004-04-29 14:36:28" fw= a10-10-10-10 pri=1
mid=2102 mtp=2048 msg="Rate-Limiting: Maximum
Packet Rate reached, dropping the packet from ext
n/w" ruleid=23 agent=Firewall