Nortel SMC 2450, Implementation Manual

Page: 86 / 262

Page 86 of 260 Installation and configuration
553-3001-225 Standard 1.00 May 2006
iii. Enter the network mask.
iv. Enter the gateway IP address.
• Enter
no
to indicate you do not have an MCS setup.
CS 1000 Result : The system initializes and rules generate for the ELAN
subnet, TLAN subnet, and Server LAN subnet. The system logs you out and
you must log on again to continue management on the SMC.
MCS Result: The MCS filters are configured. The system logs you out and
you must log on again to continue management on the SMC.
End of Procedure
Accessing the SMC through the Web UI
Allowing remote Intranet access
If you enabled Web administration in step 10 of Procedure 6, the access list
is updated automatically for Web browsers with IP addresses on the
management subnet. If you chose not to enable Web administration, you must
allow an Intranet client workstation remote access to the SMC.
In Procedure 7, you add the IP address of an Intranet client workstation for
remote management access such as Telnet, Web User Interface (UI), or SSH.
Entering a 32-bit mask (255.255.255.255) limits access to only that particular
IP address.
Procedure 7
Allow remote Intranet access
1 If you are not already logged on to the SMC, perform the following steps:
a. Press <Enter> on the console terminal to establish the connection.
The SMC login prompt appears.
b. Enter the admin login name.
c. Enter the admin password.
The Main prompt (>> main#) is displayed.
2 Enter
/cfg/net/if intranet/mgmt