manualshive.com logo in svg

Nortel SMC 2450, Implementation Manual

Share
Download
Nortel SMC 2450 Implementation Manual Download Page 70

Page 70 of 260

 Hardware installation

553-3001-225

Standard 1.00

May 2006

Result

: you can now connect the power supply. See “Connecting the power 

supply” on page 71.

Supplying power to the SMC

Supply power after installing the unit in a rack or on a flat surface. Use of both 
the rear and front power switches is required for full SMC operation.

Power reliability

The SMC is a critical component in the enterprise communications system. 
The SMC does not support APC protocols for graceful shutdown in the event 
of power loss; therefore, you must ensure that the SMC power is supplied by 
a conditioned and backed-up source so that service is not interrupted in the 
event of a power loss or degradation.

Summary of Contents for SMC 2450







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands