Nortel 8300 Series Page 211 Reference Manual Download

Page: 211 / 220

Chapter 4 SMP log error messages

211

System Messaging Platform Reference Guide

Message

VCT Task Semaphore Creation Failed

Severity

ERROR

Description

This message is generated when creating the VCT semaphore failed.

Synopsis

N/A

Action

N/A

Message

VCT Test DONE. Get the VCT results for port <portnum>

Severity

INFO

Description

This message is generated when the process of obtaining the VCT results
finished.

Synopsis

N/A

Action

Get the results.

Message

VCT Test FAILED for Port = <portnum>

Severity

ERROR

Description

This message is generated when the VCT test failed.

Synopsis

N/A

Action

Perform the test again.

Message

verify_ospf_packet: auth failure ipa

Severity

ERROR

Description

This message indicates that the IP address is not authenticated because the key
in the packet does not match the key in the OSPF area.

Synopsis

IP address is not authenticated.

Action

Enter a valid key for authentication.

Message

VLAN -- returned by RADIUS server for port -- does not exist

Severity

ERROR

Description

This message indicates that the VLAN returned by the RADIUS server for the
802.1X authorized port does not exist on the system.

Synopsis

The RADIUS server returned an invalid VLAN.

Action

Do one of the following: create the VLAN returned by the RADIUS server or
configure the RADIUS server to return a valid VLAN.

Summary of Contents for 8300 Series





























































































































































































































Search results

Summary of Contents for 8300 Series

Reviews:

Related manuals for 8300 Series

Brands by name

Popular brands

Nortel 8300 Series, Reference Manual

Search results

Summary of Contents for 8300 Series

Reviews:

Related manuals for 8300 Series

Brands by name

Popular brands