manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 46 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 46

46

Chapter 4 SMP log error messages

316806-C

 

Message

aclAclTblAdd() malloc() SIZE <value> FAIL

Severity

ERROR

Description

This message indicates the system is low on resources.

Synopsis

N/A

Action

Reduce the running configuration or reboot.

Message

aclActTblAdd() malloc() SIZE <value> FAIL

Severity

ERROR

Description

This message indicates the system is low on resources.

Synopsis

N/A

Action

Reduce the running configuration or reboot.

Message

aclHwBuildPceParamBlock(): AclEntry <value> AclType <value> does not have 
field selection in Profile for pkt type <value>

Severity

ERROR

Description

The template associated with the ACL does not have the fields configured for 
rules in the ACL. A missing or incomplete consistency check or corruption could 
cause this.

Synopsis

N/A

Action

Try removing or enabling filters on the port. Try to delete or create the ACG from 
the port. Check dump using aclDumpAclTbl() or aclDumpAceList().

Message

aclHwBuildPceParamBlock(): AclEntry's AclType is NOT SUPPORTED

Severity

WARNING

Description

Two possible ACL types are IP, Non-IP. Any other value for type field indicates a 
corruption or incorrect information in the instrumentation table.

Synopsis

N/A

Action

Try removing or enabling filters on the port. Try to delete or create the ACG from 
the port. Check dump using aclDumpAclTbl() or aclDumpAceList().

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments