Nortel 8300 Series Page 55 Reference Manual Download

Page: 55 / 220

Chapter 4 SMP log error messages

System Messaging Platform Reference Guide

Message

Bkend state of Port -- - Recd Respose from supplicant

Severity

INFO

Description

This message is generated when 8021x Backend Authentication State Machine
receives a response from supplicant.

Synopsis

Supplicant sent the EAP Response packet for the user on specified port.

Action

No action necessary

Message

Bkend state of Port -- Recd EAP request from Server

Severity

INFO

Description

This message indicates that an 802.1X Backend Authentication State Machine
received an EAP request from the RADIUS server.

Synopsis

The RADIUS server sent the EAP Request packet for the user on the specified
port.

Action

No action is necessary.

Message

Blocked unauthorized nncli access

Severity

WARNING

Description

This message indicates that unauthorized NNCLI access has been blocked.

Synopsis

N/A

Action

N/A

Message

Blocked unauthorized nncli enable access

Severity

INFO

Description

This message indicates that unauthorized NNCLI enable access has been
blocked

Synopsis

N/A

Action

N/A

Message

bootpdGo: Can't create Bootp Server task!

Severity

INFO

Description

This message indicates a Bootp Server task cannot be created.

Synopsis

N/A

Action

Reboot the switch and contact the customer support team if the problem persists.

Summary of Contents for 8300 Series





























































































































































































































Search results

Summary of Contents for 8300 Series

Reviews:

Related manuals for 8300 Series

Brands by name

Popular brands

Nortel 8300 Series, Reference Manual

Search results

Summary of Contents for 8300 Series

Reviews:

Related manuals for 8300 Series

Brands by name

Popular brands