manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 53 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 53

Chapter 4 SMP log error messages

53

System Messaging Platform Reference Guide

 

Message

autoSavePcapData: Memory not available to save all packets. Saving only 
<number-of-packets-saved> of <total-number-of-packets> packets

Severity

INFO

Description

This message is generated when PCAP tries to do an autosave and finds that not 
enough memory is in the PCMCIA to store all packets.

Synopsis

N/A

Action

Free up some memory in the PCMCIA.

Message

avpair_get Unknown attribute x

Severity

ERROR

Description

This message indicates that a RADIUS attribute unknown to the Passport 8300 is 
being looked-up.

Synopsis

An unknown attribute exists in the received RADIUS packet or sent packet.

Action

Verify that the sent and received RADIUS packets contain known attributes.

B Messages

Message

bind failed

Severity

ERROR

Description

This message specifies that a socket cannot be bound for the bootp daemon.

Synopsis

N/A

Action

Reboot the switch and contact the customer support team if the problem persists.

Message

Bkend state of Port -- - Recd accept from server

Severity

INFO

Description

This messages indicates that an 802.1X Backend Authentication State Machine 
received an Access-Accept message from the RADIUS server.

Synopsis

The RADIUS server sent an Access-Accept message for the user on the specified 
port.

Action

No action is necessary.

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments